Monolift Attachment for Thor Power Cage, Garage Power Cage & Half Rack - 60mm x 60mm Box Section

It does what it says in the description. very useful for home/garage gyms. I like it for banded box squats. I cannot walk out with the bands and when I go above 50% or 1MR It becomes hard to unrack the bad from pins. This is why I bought the monolift attachments. I also started using it for heavy bench day when I tend to loose the back tightness and positioning when using regular pins as I have spotter. The monolift attachment does the trick. Overall it is a must have for both lifts. There are two negatives though. The first is that the distance between the hook when loaded and unloaded is way too far. I addressed this on my bench by adding the old pins on the first hole under the monilift attachment as I stopper. My pins come out about 3 inches which in my opinion is a perfect sport to be able to rack the weights on bench and dropping the hooks on your forhead. The other negative is that the bolts have round heads with massive alan key hole ! Who has these alan keys at home ? I ended up using a wrench on the round bolt head and scratched it a lot in the process. Now that I think about it there is another negative. The fiber glass what not thingy that holds the bar bangs against the body of the attachment when you lift the bar and damages it. Not a biggie but after one use you get quite a big dent on the fiber glass what not thingy :)

Got the half rack (which is also great) and decided to get this to help with squats/benching by myself. It is superb! Takes a bit of fiddling to get it bang on with the swing (not too tight and not too loose) but when it's there it is so so good. Walking the bar out can be irritating especially when going heavy, I can get my feet bang on before loading up and then I'm ready to go. Also it works with a thicker bar, I've got a thick ssb and it sits fine on it.

Wasn't too sure if this would fit my rack as it's not the Thor rack but a Bodymax C485. It is a 60mm box section steel rack so I took the gamble on it. Luck has it, fits perfectly. The monolift comes requiring some minimal assembly. It's only 4 bolts and nylock nuts but a 12mm allen key will be required and a 19mm spanner or socket. It took a little trial and error to get the tightness of the nuts right, too tight and it wont move properly, too loose and it will flop about too much. It's not rocket science. The construction is seriously heavy duty. Much heavier than I expected. The pictures don't do it justice. The welds are pretty decent and straight. The hooks where the bar rests looks like some sort of glass reinforced nylon so it's not going to scratch your bar up. I've had the monolift for about a week now and used it for squats and bench. I lift alone so benching in the rack is always going to be safer with the aid of pins. Sometimes getting yourself set up for the bench is best to have someone hand you the weight as pushing it off hooks then moving into position upsets how tight your lats/shoulders are. The monolift totally eliminates that problem. Just set up so your arms are directly under the bar, push up and the hooks move back out of your way by a couple of inches. When you have lifted the bar back up let the arms swing up to latch back on the hooks. Brilliant. Using it for squats eliminates the walk out. Just stand directly under the bar push up and squat down. When you've stood back up lean forward and the bar lands on the hooks. I love it.